Reset Canon i350, i355
20:19
Edit
Problem:
Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error p07.
Printer:
Canon i350, i355.
Reset Canon i350, i355:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press and hold the Resume button.
3. Press and hold the Power button.
4. Release the Resume button (the Power button is still pressed).
5. Press and releasing the Resume button one time.
6. Press and hold the Resume button.
7. Release the Power and Resume buttons together.
After the both buttons are released, the power indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.
Step 2: Reset Canon i350, i355
To reset the Canon i350, i355 it can be done with:
a. General Tool v0.05
b. General Tool v1.01
 |
| General Tool v0.05 |
a. Reset with General Tool v0.05
· Download General Tool (support Win XP, Vista, 7, 8, 8.1, 10).
· Extract file and open General Tool.
· Select USB Port (1)
· Click Device ID (2)
· Set Destination. Click i350/i355 (3)
· Give check EEPROM CLEAR (4)
· Load paper to the printer
· Test Pattern 1 (5) wait for the printing process to finish
· Test Pattern 2 (6) wait for the printing process to finish
· EEP-ROM DUMP (7)
· Close GeneralTool (8)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer ready for use.
 |
| General Tool v1.01 |
b. Reset with General Tool v1.01
· Download General Tool (support Win XP, Vista, 7, 8, 8.1, 10).
· Extract file and open General Tool.
· Select USB Port (1)
· Set Destination. Select 1 (2)
· Give check EEPROM CLEAR (3)
· Load paper to the printer
· Test Pattern 1 (4) wait for the printing process to finish
· Close General Tool (5)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer ready for use.