Reset Canon i250, i255
20:14
Edit
Problem:
Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error p07.
Printer:
Canon i250, i255.
Reset Canon i250, i255:
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press and hold the Resume button.
3. Press and hold the Power button.
4. Release the Resume button (the Power button is still pressed).
5. Press and releasing the Resume button one time.
6. Press and hold the Resume button.
7. Release the Power and Resume buttons together.
After the both buttons are released, the power indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.
Step 2: Reset Canon i250, i255
To reset the Canon i250, i255 it can be done with:
a. General Tool v0.05
b. General Tool v1.01
a. Reset with General Tool v0.05
· Extract file and open General Tool.
- Select USB Port (1)
- Device ID (2)
- Set Destination, select printer model (3)
- Check EEPROM CLEAR (4)
- Load paper to the printer
- Test Pattern 1 (5), wait for the printer to finish printing
- Test Pattern 2 (6), wait for the printer to finish printing
- Close General Tool (7)
- Turn off printer (wait 10 seconds)
- Turn on printer.
- Printer ready for use
b. Reset with General Tool v1.01
· Extract file and open General Tool.
· Select USB Port (1)
· Set Destination 1 (2)
· Load paper to the printer
· Check EEPROM CLEAR (3)
· Test Pattern 1 (4), wait for the printer to finish printing
· Close General Tool (5)
· Turn off printer (wait 10 seconds)
· Turn on printer.
· Printer ready for use